Geo Metro Proper Brake and Wheel Bearing Job. The Way It Should Be Done
6 MONTH FINANCING ON EVERYTHING OVER $99.00 DOLLARS
JUST CLICK ON THE BILL ME LATER BUTTON AT CHECK OUT
A complete full service brake job. Nothing but the best parts and workmanship. The brake rotors and drums are removed and lathe cut to perfectly square than satin finished to perfection. The wheel bearings are removed and discarded for brand new bearings (inner and outer). The replacement bearings are far superior with double sided seals to hold the grease in the bearing races for the rear drums. The stock bearing is open face and the grease is centrifugally thrown out causing premature failure. The very best OEM pads and shoes are installed. The calipers are lubed as well as the wheel cylinders are serviced. The automatic brake adjusters that normally don't work are repaired and all the hardware is lubed. When the job is complete the brakes are painted to seal them from road salts and water rust.
Then to complete the job the brake fluid (moisture) is flushed out of the system and refilled and bleed.
I don't care where you go no one does a better brake job and any money you ever could save will not equal how long and how well this brake job will work for you.
$650.00 The best 4 wheel brake/wheel bearing job money you can buy. This service will allow most of you to make it out many many years. Geo's as a rule of thumb can go many years on rear brakes and bearings alone if taken care of. There is no good reason to not do both the bearings and brakes together. Certainly don't pay more some where else as no one does a more complete service.
For most of you this will be the last brake job you ever do on this Geo metro
$350.00 for the front and rear brake job with out wheel bearings. parts and labor
$450.00 for front and rear wheel bearings with out doing a brake job. parts and labor
A savings of $150.00 dollars or more by doing the brakes and bearings together.